Skip to content

Cart

Your cart is empty

For artists

HANG IT BLANK. PAINT IT IN PLACE.

PrestoTex is a paintable wallcovering substrate that goes up before the work begins. Hang it blank over the existing wall, then paint your mural right where it will live. No priming, no repainting, no resurfacing when its time to change the design.

A fresh surface for every mural that comes down clean when the design changes.

Where standards begin

ONE SURFACE FOR EVERY WAY YOU WORK

PrestoTex gives artists a surface that adapts to the project instead of the other way around. Paint directly on the wall with no prep, work flat in the studio, or cut a roll down for a full classroom. Whatever you make, it goes up clean, comes down clean, and never commits you or your client to a permanent change.

01

Create in your studio.
Install on the wall

PrestoTex breaks the dependency between creation and location. Roll it out on your studio floor, work it flat or to wrap it on a frame as a blank canvas, then peel and stick it to any wall when the piece is finished. The work travels with you. The wall is just the final destination.

02

Site-specific work
without site-specific risk

Site-specific work without site-specific risk. Galleries change. Exhibitions end. Clients move. PrestoTex lets you create permanent-quality work that is not permanently committed to one wall. Take it down, reinstall it elsewhere, or swap it for a new piece without any of the consequences of working at scale on someone else's surface.

03

Teaching, workshops, and
class-scale production

PrestoTex rolls cut down to any size, making it ideal for classroom and workshop settings. Give each student a working surface sized to the exercise, supply a full class from a single roll, and work at a scale that would be impractical on stretched canvas or board.

What works on PrestoTex

More mediums than you would expect

PrestoTex accepts a wide range of traditional and non-traditional mediums. Its coated surface grips paint, ink, and mixed media well, and the woven polyester substrate handles the kind of layering and texture that thin materials can't.

Acrylic Paint
Excellent adhesion. Works flat or layered, fast-drying and flexible on the substrate.
Oil Paint
Works well with proper dry time. The woven polyester handles oil without warping.
Liquid Copper & Metal Paints
Tested and confirmed. Metallic and liquid copper paints adhere well and hold their finish.
Collage & Mixed Media
The surface accepts glue and adhesive media. Collaging, layering, and embedding all work.
Wide-Format Inkjet
Solvent, eco-solvent, latex, resin, and UV inks. Print your work, a photograph, or a base layer, then paint over it.
Spray Paint & Aerosol
Works well for street-art and mixed-media applications. The surface holds aerosol cleanly.

A note on watercolor:

Watercolor is the one medium we've tested that doesn't work well on PrestoTex. The coated surface resists water absorption, causing the paint to bead and pool rather than absorb. All other water-based mediums with a binder, such as gouache or acrylic, work fine.

Why it changes things

The practical advantages artists don't expect until they use it

PrestoTex solves problems that have always been part of making large-scale work.

Cut to Any Size

No fixed dimensions. Cut a roll into panels, strips, or sections sized to your concept, not to a standard format.

Swap Out Work Anytime

Instead of a permanent mural, install rotating work. Swap pieces between seasons, or commissions without repainting the wall.

EASY TO TRANSPORT

Lightweight and flexible, PrestoTex rolls up for travel. Bring blank material to the site or move finished work between locations without special handling.

No Wall Damage.

Rental spaces, gallery walls, client homes. PrestoTex removes cleanly from properly prepped walls without residue or damage to the wall beneath.

Studio to installation

How it fits into your practice

  1. 01

    MEASURE AND CUT

    Measure the wall and cut PrestoTex to size with a sharp blade, scissors, or a flatbed cutter. 

  2. 02

    INSTALL THE SURFACE

    Peel-and-stick PrestoTex applies directly to a clean, smooth wall. Non-adhesive PrestoTex can be used as canvas wrap on a frame.

  3. 03

    PAINT ON SITE

    Paint, draw, or work in mixed media directly on the installed surface. You get a consistent finish to work on from edge to edge, regardless of what the wall looked like before.

  4. 04

    OR START IN THE STUDIO

    For smaller pieces or panel work, create flat on your studio floor or table, then install when the work is ready. The substrate stays flat and dimensionally stable either way.

  5. 05

    Remove Cleanly

    When it’s time for something new, peel-and-stick PrestoTex comes down without wall damage or residue, leaving the wall ready for the next piece.

Frequently asked

Questions artists ask before they order

Quick answers to the questions that come up most often when artists, muralists, and installation-based practitioners are evaluating PrestoTex for their work.

What kinds of paint and ink work on PrestoTex?

PrestoTex accepts acrylic, latex, gouache, marker, and ink, as well as wide-format prints. The coated polyester surface is designed to hold pigment without bleeding or pooling. We recommend testing your specific medium on a sample roll before starting on a full piece.

How does PrestoTex compare to canvas or board?

Canvas and board are rigid and heavy at scale. PrestoTex is flexible, rolls for transport, and makes it easy to work on sizes that would be impractical to stretch, frame, or ship as a single piece.

Will the adhesive damage my client's wall when the piece comes down?

No. The peel-and-stick adhesive on PrestoTex is repositionable during installation and removes cleanly when the piece comes down, with no residue and no wall damage on properly prepped walls. This makes it suitable for both temporary work and long-term installations.

Can I use PrestoTex for permanent installations?

Yes. The peel-and-stick version installs as a long-term solution and can stay up for years, while still removing cleanly when needed. For fully permanent installations, or if using paste is preferred by the client or installer the non-adhesive version paired with traditional wallcovering paste is also an option.

What sizes can I cut PrestoTex to?

PrestoTex cuts cleanly to any dimension. Cut a small panel for a single piece, or cut a roll into a full set of working surfaces for a class. A sharp blade, scissors, or a flatbed cutter all work for production-scale cutting.

How do the metallic substrates affect a painted or printed piece?

White is the standard base for true color reproduction with full opacity. Silver adds a soft metallic shimmer that lifts lighter colors and shows through transparent or thinly applied work. Gold Iridescent brings warm, dimensional depth to richer prints and paintings. Sample rolls in all three are available for testing.

Can I order a single roll to test before committing to a larger order?

Yes. Sample rolls are available so you can test PrestoTex with your medium, your scale, and your installation environment before committing to production volume. Volume pricing kicks in at 5 and 10 rolls online.

Try it in your practice

Order a sample. Try it out.

Order a sample roll, use it as your canvas, and see how PrestoTex performs with your mediums.